18 April 2012

Instrument rigs and gear setup

"How much gear do i need to play my fiddle live?" I am often asked.
Well, it depends greatly on what style you are playing and what sounds you are going for.

If you play in great concert halls with fantastic acoustics all the time, you might never need anything but your great acoustic instrument.

If you play at festivals, concert venues or small cafés in an amplified acoustic or electric setup then read on.


In this article I am going to show you a couple of different setups, from very basic to more advanced.

A lot of musicians (like me) have different rigs for different applications. Just like we are using different instruments for different pieces.


The most basic stage setups

One microphone on a stand for the entire band and the FOH (front of house) PA system provided by the venue.
This can work very well for small bands, if every musician play acoustic instruments and are trained at how to place themselves in front of the microphone.

A little more comprehensive is a multi microphone setup, either stereo or a microphone on a stand in front of every musician.

Read more about microphone placement elsewhere on the blog.

Still keeping it simple

Acoustic instrument with microphone attached to it, going through the venues available PA.
If you play acoustic music with an acoustic band or semi-acoustic band a miniature microphone can be attached to the instrument, making the player able to play louder and move more freely.

If you want to play even louder, a semi-acoustic setup with a more permanent attached onboard pickup is the way to go. (On stringed instruments they are often placed in or under the bridge.)
Most pickups need pre-amplification and you will have to add that to your rig.

There is also the possibility of combining both microphone and pickup for a natural "miked" sound. In the future I will make an article dedicated to blending.

As you play louder hearing yourself (monitoring) often becomes a problem.
Bigger PA's have monitors, but to be able to get consistent sound you could add a stage amplifier to your rig - either a combo or a small powered PA speaker.
Adding a combo will also make you able to play smaller gigs where no PA is available - instrument with pickup/microphone and using your amplifier for both monitor and "PA".



Becoming more advanced

Now you have an instrument, microphone/pickup, preamp and amplifier in your rig.
If you are still going for a fairly natural sound coming from your fiddle, but you want to be able to tweak or change your sound on stage.

You could add an equalizer to tame a little squeak or problem-frequency out, or change the character of sound from backing to solo.
Or you could add a delay to thicken up your sound.
Maybe add a reverb to soften your sound.

If you want to change you sound more radically you could add an octaver, which can add an octave above or below to you sounds or both. (Some octavers do not track the notes of bowed instruments well, so be care full to find a suitable one.)

Going electric

If you play in a loud band with other electric instruments - guitar, bass and drums - you have to start considering going electric yourself.

The electric violin or viola will not sound like your acoustic. You will have to find a combination of instrument, preamp and amplifier to get a sound that suits your playing style.

The electric setup is often enhanced with a wider range of effects - like flanger, compression or distortion.
Some will add a multi-effects unit and some seek out a select hand-full of usable single pedals. Others will add a computer to their setup, which provides the effects and amplifier simulations.
The final possibility is to add midi to your setup. This makes you able to control your rig and if you have the right pickup and interface you can make your bowed instrument sound like other instruments - brass, guitars, synth etc.
 



8 comments:

  1. Hi Jansberg,

    can you tell us more about this electric violin? What kind of pickup is used, is it an active instrument and - this is pretty important for me - how does it sound through the Aura Preamp?

    ReplyDelete
  2. The violin in the pictures here is a prototype violin - you can see more about the final model here: http://jansberg.blogspot.dk/2012/11/new-electric-body-design.html

    ReplyDelete
    Replies
    1. Thanks. I also found your postings at the fiddleforum about the Aura, thanks for the effort and work on all theses recordings.

      BTW, have you ever noticed changes in sound depending on the lenght of the cable between pickup and preamp?

      For my setup it was a huge step forward when I connected the passive pieco (sp?) to a preamp (fishman g2).

      Delete
  3. my pleasure... regarding length of cable - I would keep cables as short as convenient but I never needed a cable longer than 5 m..
    A high impedance preamp is a must with any kind of piezo (they are passive devices). In fact any pickup and mic needs a preamp.

    ReplyDelete
  4. Just in case you are using passive piezo pickups with a connection to the preamp longer then 1.5m I highly recommend testing a setup with a short cable. There is an issue about asymetrical frequenzy loss in long cables at high impedances. For my setup using the preamp in "belt position" was like opening a window.

    ReplyDelete
  5. hi
    im playing a violin
    and i orderd a
    BEHRINGER ULTRA OCTAVER UO300
    And he did not Receive
    The frequency range of my violin
    Is there something to do

    ReplyDelete
    Replies
    1. Most octavers does not track violin very well. I recommend the POG or micro POG, which in my opinion are the best tracking for violin.

      Delete